Clik here to view.
Spreader Beam Analysis
I am having trouble getting believable results from simulate while analyzing a simple spreader beam. I am new to simulate, so I don't know if I am constraining and/or loading it correctly. Any advise...
View ArticleClik here to view.
Nodal force & displacement output on selected surfaces from a global model
Hello,Is it possible to output the "resultant forces" on a few selected surfaces from a large global model that has been already solved? I have multiple "load sets" in this global model and want to...
View ArticleClik here to view.
Contact Problem
Hello,In this problem I have a cylinder and a rectangular plate. Here is step 0, where nothing is done to either of them. The cylinder is resting on the surface of the plate. In Step 1, a force is...
View ArticleClik here to view.
Application of a mobile thermal loads without a time function
Hi ,Anyone can help me to create a mobile thermal loads for a welding process,knowing that I have just the spatial function of the load. ThanksBye
View ArticleClik here to view.
Angular units and Computed Measures
I'd always been under the impression that Pro/E used degrees as the angular unit throughout - it certainly seems to hold true in Relations. However, I've just discovered that if you create a Computed...
View Article"Results from template" doesn't open result file of the current output directory
Hello, I just noticed something that seems to be a bug of the software, If I am not wrong.By chance, I carelessly created and run two structural static analyses with the same name but in two different...
View ArticleClik here to view.
Single-pass adaptive analysis completes while Multi-pass aborts with fatal error
Hello, I have performed some calculations on an assembly containing some contacts.Firstly, I run the single-pass adative static analysis and it completes without any problem.Secondly, I performed the...
View ArticleCan one controlling element growth after specifying surface element size
Can one control the element size growth after specifying a surface element size. In solidworks, one can specify the ratio of the next set of elements as the mesh is created from the surface. Can...
View ArticleClik here to view.
Stress analysis simulation on welded parts
Hi 1. can i do a static stress analysis simulation on 2 wlded parts (i have added the welding feature with the "application" module out of the understanding that maybe this is the only way CREO can do...
View Articlestatic stresses analysis on welded assembly can it be done?
Hi1. On general, can static stress analysis can be done on assembly ?2. i have a sheet metal assembly made of 2 (8mm thick) sheet metal parts, ther are assembeled by grooves and weldingi have added a...
View ArticleClik here to view.
Mechanica analysis run error with 'internal engine error'
When I run a sensitivity design study, it occurs error at step 2, as rounded below in red spline. The design variable is tensile force. Why did it come out such a error?
View ArticleClik here to view.
MDO - How to know the torque of a motion
Hi, I need to know the torque needed to move a mechanism, but I don't know to simulate this motion on MDO. I have the machine assembled with mechanisms. It consists of a "sliding table" assembled as a...
View ArticleClik here to view.
Values different for RPT and CSV output files...
Has anyone seen this? I opened a CSV file to manipulate some of the tables and the values are different than what is in the RPT file. The attached picture shows what I am talking about. This...
View ArticleClik here to view.
FEA...How to define roller bearing constraint in mechanica ?
Hi,I am trying to define bearing constraint. I have base plate that is supported by two shafts at either ends. These shafts are supported by bearings so that plate can rotate around shaft axis.Please...
View ArticlePrestress Modal Analysis - Static Analysis Results Error
Hi, I am doing a Prestress Modal Analysis and trying to use previous results from a static analysis but it aborts due to the error: The design study terminated abnormally.The model geometry has changed...
View ArticleClik here to view.
Finite friction blocks
Hello All, I am trying to develop a feel for the behaviour of Creo3.0's finite friction. So starting with a simple model Text book concludes no sliding.Reality tells us that the pressure...
View Articlecan it is possible to create thermal and structural analysis in Creo Simulate
can it is possible to create thermal and structural analysis in Creo Simulate.
View ArticleHow to animate hook movement
Does anyone know the easiest way to animate the movement of a hook.The hook is placed on a lid and snaps into a base.The lid is constrained with an opening angle in the assembly. The hook in the lid is...
View ArticleP vs h-type
Hello All, I have a reasonable armoury of info and knowledge with respect to the relative merits, use and background of the h and p-type approach. I have Ken Short's note on Adaptivity from (about)...
View ArticleAir Flow analysis - Ductwork
Good Morning, My name is Daniel and I need some information about the analysis and fluid dynamics with the Simulation CFD software.My company works in the construction industry and we use Autodesk...
View Article