showing maximum stress of multiple load sets in one result window
Hello, I am wondering if you can show the maximum stress for each element caused by different loads sets. I do not want to superpose the different stress results. My intention is to check the stress in...
View ArticleSine Sweep in Dynamic Freq. Analysis
Hello.... I want to simulate a sine sweep in Dynamic Freq. analysis. I thought it would be easy to input it with a symbolic expression. I tried several expressions, all with no luck. I want F(x) ==...
View ArticleImport test data - file format
I'm attempting to import a stress-strain curve for an elastoplastic material, but keep on getting the attached error. Is there a trick which I am missing? I feel like I have the correct format, but...
View ArticleClik here to view.
Should "Account for Stiffness" option be in Preload option like in Fastener?
Hello All, As Account for Stiffness option is available in Fastener connection while applying Preload Force. Shouldn't it be also available in Preload while defining loads separately to a component?
View ArticleClik here to view.
How to determine Simulate licenses used by current session?
Hi, Trying to solve my lost license issue that happens when running a Creo Simulate static contact analysis. During the analysis run I'm losing the license multiple times during the run.PTC ask us to...
View ArticleClik here to view.
Rotation for part(s)
Hello, There is the "rotation" option under the "translation" but it doesn't operate so easily than the definition of translation. Why? How can I define a simple rotation (with certain angle value) for...
View ArticleIs there a way to simulate water in creo?
Hello PTC Community, For my Engineering your Future class in high school we have to build a catamaran boat, but we only get 1 opportunity to 3D print it without paying. We are building our models for...
View ArticleMechanism Analysis - Constraint Failure
Hi everyone, I have a mechanism analysis set up involving three hydraulic cylinders linked to a common part. During the analysis, I get an expected failure, "The mechanism constrains could not be...
View ArticleClik here to view.
Optimization study issue
Hi all,If I star an optimization study, the log reports that Creo2 is being started in the background.The command shell opens, xstop is listed in the active processes, bu then nothing happens.The model...
View ArticleCreate point for command Total Load at Point
Hello!I would like to use the Total Load at Point,but I don't know how to create the point Can You help me? Thank you Regard
View ArticleClik here to view.
Error message with fasteners
Hello!Can you help me to understand this message? Thank you
View ArticleForce constraints on natural frequency analysis
I've made a simple support structure on which about 150kg load is applied and the structure is attached to other frames.I did natural frequency analysis (modal analysis) on the structure itself for...
View ArticleEngineering vs True stress-strain?
Hello, We're attempting to perform a analysis using a non-linear hyperelestic material (similar to santoprene) using Creo 3.0 M070. We have the engineering stress strain data for import, but I've...
View ArticleTrace of curves of results
HelloWhenyouwant toplotthegraphofdeformationorcompulsion,byexample of a square beam, it is easy to designate a stop on whichwill betracedthecurve.Butwhenthebeamiscylindricalandthereisnotto...
View ArticleCreo 2.0 Simulate Lite Analysis - 'Cannot find engine output file'
Hello community,I was super optimistic after getting some valid-looking stress results after applying some load to a platform I'm trying to evaluate (Using Creo 2.0 Simulate Lite - Student License, and...
View ArticleClik here to view.
AutoGEM Mesh creates error: This shape change invalidates the highlighted...
Good Afternoon, I'm trying to mesh an assembly and I receive the following error message:"This shape change invalidates the highlighted bearing loads. Please delete the bearing loads if you want to...
View ArticleClik here to view.
"Use element from existing mesh file" is greyed out, I cannot pick it. Why?
I am in Creo Simulate, I created a mesh file with autogem and saved it, I want to use this mesh in the analysis, I go to run settings/ override defaults and the pick "Use element from existing mesh...
View ArticleClik here to view.
Structural Temperature Loads Failing
I have applied a structural temperature load of -400 F on 1045 Steel. I've plugged in the material the coefficient of friction which is .00000772 with a load of -565 lbf in the y direction and the...
View Articleweigthed link, unreal simulate results
Hello there, Here is the thing, I have a frame that I want to analize under load while it is lifted, for that puspose I set a weighted link constrain, so that the frame is "hanged" and the load...
View ArticleClik here to view.
Flywheel analysis with Creo Mechanism
Hi all,I wonder if it is possible to study the relevance of the insertion of a flywheel in the motion chain.I expect to see something by looking the Net Load at the servo motor. My mechanism is a group...
View Article