Clik here to view.
Screw Connection Cast Iron/Cast Iron
Hi everyone,Here David, new user of PTC Creo Simulate.Hope you can help me with this question.As far as I´ve read about screw connection, there are different possibilities to simulate a screw...
View Articlemodel/assembly parameter as variable in a optimisation study
Hello to all! I am new on the forum and also quite new as a Simulate user, so please be patient with my questions... I am trying to solve a problem with a snap-fit, where I have a given geometry and I...
View ArticleAnalyzing rotating effort using Dynamic Option in Mechanism
Hi, I have case where I need to calculate effort required to rotate platform about vertical pivot. Platform has its own weight around 200Kg and weight itself resistance to move. I am new to the Creo...
View ArticleClik here to view.
LDA: static analysis with more than one output step used for optimisation study
Hello again.Some time ago, I was stucked with next problem: model/assembly parameter as variable in a optimisation studyThe original problem is now solved and now I started to research (because i want...
View ArticleSwept Sine on Random
My current experience with Creo simulation is primarily random vibration and dynamic time analyses, but have recently been required to perform sinusoidal content, in particular, a swept sine on random...
View ArticleClik here to view.
Screw Connection. Cast with the ground.
Hello People, Here it comes my question. I have a structure connected with the ground (I don't have Information about material of the ground).Screws: M56*200mm (8.8)Preload (tables): 1097 KN There are...
View ArticleCluster/Distributed Computing für Creo Simulate?
Hi!Creo Simulate has a feature called distributed computing. Is this some parallel computing using e.g. MPI distributing a simulation load over multiple nodes? Is there any good setup-How-To? Is this...
View ArticleHow to calculate effort using Dynamic Option in Mechanism?
Hi,I have case where I need to calculate effort required to rotate platform about vertical pivot. Platform has its own weight around 200Kg and weight itself resistance to move. I am new to the Creo...
View ArticleClik here to view.
Import hypermesh/ansys mesh file in Creo simulate
Hi,I am new to Creo simulate. I just had question in my mind whether we can import mesh file from other workbench and run analysis in Creo?Thanks,Gajanan
View ArticleClik here to view.
Weld Suppression?
I'm having some difficulty with Creo Simulation 2.0 using perimeter welds. For model that I have created a perimeter weld feature, every time I start the simulation the weld that I have created and the...
View ArticleA few Creo Parametric Simulate Enhancement Requests
Hi, I hope some people will find the following ideas of value so they can be added to the software in the very near future.Most of these I'm sure others have thought of in the past.Please vote on if...
View ArticleClik here to view.
How to select a component in Creo Parametric Simulate and show only all of...
Good Afternoon Everyone, I have a component in a assembly where I want to find all of the Creo Simulate Contact Interfaces that reference this component.From what I can tell, Reference viewer unable to...
View ArticleCreo 2.0 Parametric - Moving Parts Realistically
For the past month, I have been trying to find out this feature in Creo Parametric. This feature does not allow parts to intersect and causes other parts in the assembly to move with their...
View ArticleHow come the "pushingforce" drops to zero at the peak of the snap?
Hello, I don't seem to understand why the results are as shown in the attached picture. I'm performing a contact analysis in Creo 3.0 Simulate; the force increases as it should but the when the...
View ArticleClik here to view.
incorrect von mises and max principal of simple lifting lug static analysis
Hi folks, im new here and im also new at using CREO Simulate, havent really gotten the grabs of this p-element stuff yet.To the point: I'm performing a static analysis of a lifting lug which is...
View Articlebatch runs...
I know I can set up a design study in a given part and have it run thrua set of different boundary conditions in Mechanica. This works finefor a single part, but is there any mechanism in Mechanica to...
View ArticleClik here to view.
Creo 2.0_export from simulate
Hello community members,I have a question concerning the export from simulate. I want to export the results to the file which will keep deformation in motion (video file) Thank you in advance, Alexander
View ArticleClik here to view.
MDO - How to know the torque of a motion
Hi, I need to know the torque needed to move a mechanism, but I don't know to simulate this motion on MDO. I have the machine assembled with mechanisms. It consists of a "sliding table" assembled as a...
View ArticleMeasure stress in bolts
Hello, I am a student working on a project. And i am doing a simulation of a light pole connected to a house wall. So that the load of the light unit at the top is perpendicular to the bolts. I have...
View ArticleClik here to view.
Non-symmetric results for symmetric model and load?
Why is it that displacement for a cone is not rotational symmetric for an internal pressure?A sample model is attached (Creo 3.0) I've brought it back to the bare minimum. 1/4 cone, symmetry, default...
View Article
