Clik here to view.
Volume regions must have an external surface?
Creo3.0 M030 Anyone come across this? Attached model contains 2 volume regions. Volume Region 1 works fine and has an external surface. If I try and bury it (resume extrude 2) the volume region fails....
View ArticleClik here to view.
RPT file and displacement plot have different values
Hi all, I am running a simulation of a part in CREO Simulate and the RPT output from the simulation does not match what the displacement plot shows when viewed in the simulation results. I have checked...
View ArticleCreation of matiere.mtl
HelloWhen I created a material sheet in Creo 3.0 M080 and I saves it, brand the material name in the destination directory, but the card is empty.All information are inside disappeared it comes to the...
View ArticleCreo Simulate Output Files
Hi All, I've been running many simulations on Simulate and in each simulation I change something small to see its impact. At the end, I am left with a huge folder containing all the simulate results...
View ArticleCONNECT MULTIPLE LAYERS
I have a 3-layered overlap joint, and because the surfaces used to create the shells were extracted from one or the other surface of the solid part, the surfaces/shells have a gap between them. How do...
View ArticleStress - strain curves & plasticity
Hello, Should we use Engineering or True stress strain curves when carrying out plastic studies? The material (for context) is steel. I am assuming one requires True stress strain curves. Thanks
View ArticleClik here to view.
Fasteners: "cannot pair the linked assembly elements"
I'm having another try at using fasteners, but like most things in Creo it's pretty tricky without a training course or an expert on hand. The diagnostics during meshing are returning the fatal error...
View ArticleDesign value for linearized stress results...?
Does anyone have any experience from standards like ASME or similar, etc where linearized stress results are used for dimensioning? I have no problem understanding the linearized stress query, but how...
View ArticleClik here to view.
Force per unit length measurement?
Hello, Welds calculations. We are able to calculate a Resultant force on a boundary between 2 volume regions. What about a force per unit length measurement along a boundary? It would be a graph. The...
View ArticleClik here to view.
BMX module
Hi,I am new to the BMX module. Can any one suggest, the proper way of study for BMX modules.And please share the materials or sites to know about the BMX. Thanks in advance.uday
View ArticleClik here to view.
Mapped mesh issue (overlaps)
Hello all, I would like to create a mapped mesh on the red areas (see figures) but a window appears "Mesh Region is not valid as its face overlaps with another mesh region face".I found this document...
View ArticleHose simulation like mechanism
Dear All, Is there any way to simulate hose like the way creo mechanism working? Thanks,Jitu
View ArticleHow can I change the unit of measure in the Linearized Stress report?
How can I change the unit of measure (from kPa to mPa) in the Linearized stress report? thank you
View Articlelors d'un analyse en mechanisme. le graphisue de l'evolution d'un angle est...
lors d'un analyse en mechanisme. le graphisue de l'evolution d'un angle est toujours d'un sel coté de l'axe des abcisses. Il y a t-il un Moyene d'avoir des angle et des graphique avec des angles allant...
View ArticleClik here to view.
Units ?
HelloLooking atthepossibilitiesofCreo3.0M080Isawthepossibilityof havingreactions.OnlyI haveadoubtontheunits.I havestrengthin[N/mm].I...
View ArticleClik here to view.
Edge orders and timesteps
Hi, Following on from Unecessarily repeated first time step I have been investigating the use of timesteps rather than design studies. Question: If I ramp the load with the following histories and...
View ArticleClik here to view.
Finite friction blocks
Hello All, I am trying to develop a feel for the behaviour of Creo3.0's finite friction. So starting with a simple model Text book concludes no sliding.Reality tells us that the pressure...
View ArticleFull Blown Simulate
Hey All. Thought I would ask here instead of getting a Salesperson all fired up....What is the cost of Simulate these days? I have multiple licenses of Creo and can add it to one or just float it. Do...
View ArticleCOMPOSITE MATERIAL, LAYER PROPERTIES and ORIENTATION
Hi all, I'm test the feature "shell Properties" and "Material Orientation" for a simple part. The example is attached When put the boundary conditions... I believe that all is correct, more or less I...
View ArticleClik here to view.
ANSYS - Creo Simulate discrepancy
In a previous discussion I presented a contact example to compare ANSYS with Creo. In that case, both results were credible, and Creo's results was somewhat more realistic, but that was with default...
View Article