Clik here to view.
Need help regarding 3 point constraint system
I created a simple analysis with a 3-point constraint system for a plate with hole in it (the part is attached in zip file with this post) However whenever I try to analyse the part, it keeps throwing...
View ArticleClik here to view.
Shell Accuracy, small radii
Following the e-Learning program. First they say that shells are not very accurate at areas of small radii. Then they say that in comparison with shells, solid elements are not accurate at areas of...
View ArticleConcrete example of two pieces held by screws or bolts
HelloI amlooking for aconcreteexampleoftwopiecesormoremaintainedby thescrewsorboltstobe able tofollowtheentireprocedure.Anexamplethatcanserve asme a reference.Withmythanks.Kind regards.Denis.
View ArticleImprove and or Add Ability to Copy / Duplicate Load Sets, Loads, Constraints,...
Please take a moment to view the following product idea and vote on itImprove and or Add Ability to Copy / Duplicate Load Sets, Loads, Constraints, Forces and Improve Naming and Function Consistency...
View ArticleProduct Idea Add ability to Creo Simulate Fasteners to Work With Tapped Hole...
Please use the following link to vote on the following enhancement request..Add ability to Creo Simulate Fasteners to Work With Tapped Hole Lead in Chamfers
View ArticleClik here to view.
Plasticity and fasteners
NOT SUPPORTED ! Was this the case before the fasteners became beams, I haven't time to test? Ansys it is then
View ArticleClik here to view.
Family Table Grays Out after Saving in Simulation?
I was working on a Generic, entered Simulation, created some forces/constraints and ran a simulation. I saved the file. I thought I was out of simulation and found the Family Table grayed out. I...
View ArticleClik here to view.
Different direction of the arrow on two identical mounting.
HelloI recovered these two images of a gallows.One is the stem with constraints on the truss and the flat of selected.The other is the same stem but in Assembly with screws against a wall.Load...
View ArticleGetting fasteners to work
So, inspired by Roland Jakel's presentation, I thought I'd revisit an old analysis and try to re-run it using the fastener functionality. Unfortunately, the analysis ran with "The fastener is invalid"...
View ArticleClik here to view.
How to simulate a mechanism of 2 pistons coupled by a hose
We want to be able to drag/drive the piston of the first cylinder and see the piston in the second move as a result (because in reality the fluid chambers are connected). already tried a position...
View ArticleClik here to view.
Change density of all parts in an assembly - how?
Colleagues, I have an assembly, imported as Step, where all components have density=1 tonne / m^3. I need to change the density of all components to 7.8e-9. Is there any way to do this without changing...
View ArticleFactors of safety
HelloIsitpossibleinCreoSimulatetomakearepresentationofthe scale offactorsofsafetyinaroomagainstconstraintsin thematerial.Andifit ispossiblehow.Kind regards.Denis
View ArticleCluster/Distributed Computing für Creo Simulate?
Hi!Creo Simulate has a feature called distributed computing. Is this some parallel computing using e.g. MPI distributing a simulation load over multiple nodes? Is there any good setup-How-To? Is this...
View ArticleClik here to view.
Creo 3.0 Simulate results "The selected window is empty as currently viewed." ??
Hello, I am having problems using the results window of Creo 3.0. In Creo 1.0 and 2.0 I was always able to zoom in on specific stress concentrations and hit "View max" to find the highest value in...
View ArticleClik here to view.
Wildfire 3 Mechanism problem
I am trying to model an old sail ship and am currently trying to make the gun ports movable using Mechanism.The first picture shows the gun port closed, the fake canon withdrawn and the blue activating...
View ArticleClik here to view.
Problem with adding a new material
Dear, I try to simulate a composite beam that is excisting out of 2 oak beams (3x20x650mm) with in the middle 3 different steels beams with 3 different widths (1, 2 and 3mm) and the dimension of the...
View ArticleHow do you import a table in the Function Definition dialog box within...
In my simulation, I'm trying to import a table in the Function Definition dialog box. What file types/formats are supported? I've tried CSV, XLS, XLSX, TXT but none of them work. The only error message...
View ArticleClik here to view.
The model does not contain sufficient restrictions
HelloI haveaproblemwithasimpleAssemblyof2partswithcontact.I havefourbranchesininAU4Gonthewhatis exertsaforce.Thebranchesareretainedbyasteelpinwhichisconstrained. ButeverytimeI getthefollowingmessage:...
View ArticleClik here to view.
RPT file and displacement plot have different values
Hi all, I am running a simulation of a part in CREO Simulate and the RPT output from the simulation does not match what the displacement plot shows when viewed in the simulation results. I have checked...
View ArticleClik here to view.
Measure Results in Mechanisms
I have tried every combination of selecting measures and a result set but cannot get the graph icon at the top to become enabled so that I can actually compute the measures. I take it I am missing...
View Article