Singularity on edge, trying to remove
Hi All, I’m having a bit of a hard time with this. I seem to have a singularity, and I can’t get away from it. I’ve done a few simple models akin to what I’d expect here at work, and each seem to have...
View ArticleClik here to view.
Center of Gravity is not changing
So I have only just started working with analyzing center of gravity (CoG) and there is something I can not figure out.I opened up Mass Properties - I clicked preview - and the CoG was in between the...
View ArticleClik here to view.
PTC CREO SIMULATE THERMAL STEADY
Hi all, my name is Gorka Garcia... I work by Integral PLM Experts, Partner PTC Spain I've a customer that ask me about Thermal Analysis axisymmetric I've the load input (Vertical Line 45 W/m^2) and...
View ArticleClik here to view.
CREATE CODE FOR TO GET DATUM CURVES OF THERMAL ANALYSIS
Hi All, For the next question, I'm asking for the solution. Because I'm beyond me and I don't have skills. In the next Link, I expose my problematic with analysis Thermal. PTC CREO SIMULATE THERMAL...
View ArticleClik here to view.
More than 32 Gbyte memory
Can PTC please report on plans to break the 32Gb memory barrier, It's been predicted for a while now, but I would like to know when to order the extra memory.I run fairly big models, that could do with...
View Articlesimscale
Hello, Does anyone have information/thoughts about SimScale - Simulation in your browser - SimScale These are thoughts/info beyond the glossy website. Directions of thinking could include technology...
View ArticleOptimization accuracy / sensitivity
Hi all, I've basically got an assembly with a piston, crank and conrod and am trying to run an optimisation to maximise / minimise the volume using my component tolerances as my variables.I have used...
View ArticleClik here to view.
Rotation is discontinuous in beam idealization
Hello, I am running an analysis on an idealized beam. This is basically a beam with 4 vertical displacement constraints. As I need to have different load on the different segments (i.e. between...
View ArticleClik here to view.
Mechanica / Simulate Edit Load Set Description
Please vote for the following product Idea with the link belowMechanica / Simulate Edit Load Set Description It would be nice to edit the Load Set Description once you create a load set. Please add the...
View ArticleClik here to view.
Welded fillet lap joint with sheet metal radius
I typically model fillet welds as small triangles. In this case the fillet weld is along / across a sheet metal bend. As you can see this doesn't work out very well. I talked to the sheet metal...
View ArticleNutzung aller Rechenkerne im Pre- und Postprozess Creo Simulate
Ist es eine Frage der Einstellung, dass Simulate im Pre- und Postprozess nur einen Kern nutzt, oder ist das generell so? Der Solver nutzt dagegen alle vorandenen Kerne. Gerade bei der Vernetzung von...
View ArticleSimulate Lite HTML expert - Animation Speed
Good morning fellow Creo-ites! As you may know I am running Simulate Lite. I cannot find a way to slow down the Mpeg speed that is generated in the HTML export. Does full Simulate let you guys do that?...
View ArticleClik here to view.
multiple thickness shells
Hi, how can you create mid surface shell pairs in a part that has 2 different thicknesses?
View ArticleThe 32 Gb memory limit has gone
We know that for Creo-Simulate, there was a limit in the memory that can be addressed. This was independent of the physical memory in the computer, or swapspace, or solram.If an analysis needed more...
View ArticleClik here to view.
Export To VRML or NASTRAN Mesh
Hello, Is it possible in Creo Simulate to export to any of this formats? How could I do such thing? Thank you.
View ArticlePlastics Advisor Vs Mold Analysis Extension?
I'm interested in a solution which supports multiple gates, primarily so I know where weldlines will be. How do these products differ? Are there different tiers of each product as well? Thanks
View ArticleCentrifugal analysis
Hello everyone. I want to simulate a rotor of fan under centrifugal force, but I don't know how to do it. The rotor rotate 3000 rpm, I don't know where put constraint. Please describe me step by step....
View ArticleClik here to view.
Enforced displacement, tangential direction, more than 1 revolution
I've been doing some experimenting with large deformation analysis.I want to twist the end of the beam around, several times (don't ask why, I just need it done).In a large deformations analysis you...
View ArticleFatigue advisor on non linear structural analyses
Hello, I would like to know if someone has been able to made a fatigue analysis (through the fatigue advisor extension), starting from a non linear structural analysis.I know that it is not allowed by...
View ArticleRemove interference material as a result of mechansim
I am running a mechanism of essentially a gear shape. I would like to male tooth to cut out the female section as a result of the motion I have defined. These aren't really gears but a special profile...
View Article