Apply load to pin joint of part in a constant direction and allow material...
Hi All,I'm trying to analysis parts assembled together. Think in terms of turn buckle assembly.I have the hole on one end of the assembly constrained referencing a cylindrical cys.I want to apply a...
View ArticleClik here to view.
Dinamic Frecuency response example
Hello , I need an example to simulate a Dinamic Frecuancy response as on CReo Simulate ADvanced Simulation Data sheet is written and possible to be done , I tryed to obtain a(t) versus F( f Hz) as in...
View ArticleClik here to view.
creo 2.0
anybody know how to get factor of safety of part after analysis ??here , I want to get fos of part.
View ArticleClik here to view.
Fastener separation stress
Hello, Creo3.0 M030 Just checking, Can someone confirm a positive separation stress means surfaces are trying to separate? I get the following in the log from both the studies below: ' The fix...
View ArticleClik here to view.
Modular gear in Mechanism
Hi all,I would suggest a new type of gear within Mechanism: a mechanism where you can insert the law of motion of another axis, always into refer to the rotation/translation of another axis. Now the...
View ArticleClik here to view.
Non-symmetric results for symmetric model and load?
Why is it that displacement for a cone is not rotational symmetric for an internal pressure?A sample model is attached (Creo 3.0) I've brought it back to the bare minimum. 1/4 cone, symmetry, default...
View ArticleChanging text size and/or colour in results window.
Is there a way to change the text size in the results window for the legend, type of stress with load set and the analysis name at the bottom?
View ArticleClik here to view.
Config Setting for Simulate 3.0
I am running Creo Parametric/Simulate 3.0 M070. We recently upgraded our PCs and we now have 16Gb RAM, 500 GB Solid State Hard drive running Win 7 64. The processor is an intel i7-4790 @ 3.6 GHz....
View ArticleClik here to view.
Rotate with mouse scroll
Friends, I am using the Creo 2.0, and when I use the button mouse scroll for rotate the parts and these parts are to zoom far away, the rotating is good, but when the parts are near the rotate happen...
View ArticleVon Mise stress higher than Max Principal Stress?
Hi all, I am currently working on an analysis for a mechanical I designed, but when I run the design study, it gives me results showing the von mise is higher than the max principal. How can that be? I...
View ArticleLinking Creo 2.0 with Mathcad 15
Good afternoon! I'm currently in the midst of a project whereby measurements from a CREO CAD assembly will drive data in a MathCAD document. It should be possible to mark variables as either read or...
View Articlemodel/assembly parameter as variable in a optimisation study
Hello to all! I am new on the forum and also quite new as a Simulate user, so please be patient with my questions... I am trying to solve a problem with a snap-fit, where I have a given geometry and I...
View ArticleModelcheck config files - heirarchy
Currently setting up ModelCheck config files (at new company). Looking at all i detail for the first time in a few years. Much is documented well by PTC but some are still not. In the Start files...
View ArticleClik here to view.
Creo Simulate Results Area for Improvement
Annotations: Currently, the editing of annotations is "clunky". In Solidworks, one can click and drag an annotation anywhere on the screen. Here, one has to click, "edit annotation", click on the...
View ArticleSimulate Results Definition (.rwd) Files
With the introduction of Creo Simulate, I've not been able to locate the functionality where you can insert .rwd files without having to use a template. You can do this with WF5, WF4, etc. Does anyone...
View ArticleClik here to view.
Hyperelastic material with contact – looking for the best approach
Dear Creo simulate users. I would like to simulate one structure touching another structure. Once the contact happens the rubber part is deformed at the same time that the shaft bends.I would be...
View Articlemsengine.exe error
Has anybody had, msengine.exe error whilst running simulate, we are running external pressure and tensile loads.
View ArticleClik here to view.
FEA analysing the Framework extension design (Formula Student Chassis Frame).
Hello everyone. I am designing and analysing the Chassis frame with Creo using the Framework extension. I am struggling to analyse it on Autodesk Simulation Mechanical. The error i get on Autodesk...
View ArticleCREO 2.0: Creating surface/volume regions in subcomponents of assembly
Whenever I try to add a surface or a volume region to a subcomponent of an assembly, it fails. In order to add the surface/volume region, I must open that part by itself and add the surface/volume...
View Articlemechanism-connection error
We have been having trouble trying to figure out how to fix a connection problem in an assembly.We have a mechinism applied to some walls that fold down from a shelter that we build.The following error...
View Article